MULTI-CRITERIA ANALYSIS OF COMPROMISE ROAD ALIGNMENT SOLUTION FOR ROUTE 2A - SECTION KRUPA TO BOČAC
DOI:
https://doi.org/10.7251/STP2215073GAbstract
The subject of this analysis is the selection of the road alignment of Route 2a on the section Krupa - Bočac (Republic of Srpska). The complexity of the problem is reflected in the fact that a number of conflicting criteria of different stakeholders should be taken into account; i.e. criteria that are important from the aspect of road managers, criteria from the aspect of users and criteria society as a whole. The PROMETHEE method was used to determine compromise solution. Detailed comparative analysis of all parameters showed that variant 0 of the Krupa - Bočac section is a first ranked compromise solution. Sensitivity analysis has shown that the first place is stable by most criteria. Decision support framework presented in this paper can help future researchers and decision makers with similar problem.
References
M. Milenković, D. Glavić, and M. N. Mladenović, “Decision-Support Framework for Selecting the Optimal Road Toll Collection System,” J. Adv. Transp., vol. 2018, 2018, doi: 10.1155/2018/4949565.
D. Glavić, M. N. Mladenović, and M. Milenković, “Decision Support Framework for Cycling Investment Prioritization,” J. Adv. Transp., vol. 2019, 2019, doi: 10.1155/2019/7871426.
D. Glavić, Komercijalna eksploatacija autoputeva: tehnologije naplate putarine, 1st ed. Univerzitet u Beogradu, Saobraćajni fakultet, 2016.
L. Kuzović, D. Topolnik, and D. Glavić, “Induced traffic and its treatment in the evaluation of motorway projects,” Promet - Traffic - Traffico, vol. 22, no. 6, 2010.
L. Kuzovic, B. Aleksic, and D. Glavic, “The application of the multi-criteria analysis in evaluating of the road designs,” Tehnika, vol. 70, no. 1, pp. 143–150, 2015, doi: 10.5937/tehnika1501143k.
J. P. Brans, P. Vincke, and B. Mareschal, “How to select and how to rank projects: The Promethee method,” Eur. J. Oper. Res., vol. 24, no. 2, pp. 228–238, 1986, doi: 10.1016/0377-2217(86)90044-5.
A. Dehghan-Manshadi, M. R. Barnett, and P. D. Hodgson, “Microstructural evolution during hot deformation of duplex stainless steel,” https://doi.org/10.1179/174328407X239019, vol. 23, no. 12, pp. 1478–1484, Dec. 2013, doi: 10.1179/174328407X239019.
