SYNTHESIS AND NMR ANALYSIS OF THE STRUCTURE AND COMPOSITION OF TRIBLOCK POLY(ESTER-SILOXANE-ESTER) COPOLYMER BASED ON L-LACTIDE

Authors

  • Milica Balaban University of Banja Luka, Faculty of Natural Sciences and Mathematics, Mladena Stojanovića 2, Banja Luka, Republic of Srpska
  • Nataša Sladojević University of Banja Luka, Faculty of Natural Sciences and Mathematics, Mladena Stojanovića 2, Banja Luka, Republic of Srpska
  • Vesna Antić University of Belgrade, Faculty of Agriculture, Nemanjina 6, Belgrade, Serbia

DOI:

https://doi.org/10.7251/COMEN1701033B

Abstract

The synthesis, structure and composition of triblock poly(ester-siloxane-ester) copolymers, PLLA-PDMS-PLLA, based on α,ω–diaminopropyl-poly(dimethyl siloxane) (PDMS) and L-lactide were studied in this work. The samples of the controlled block length were synthesized by ring-opening polymerization of L-lactide in the presence of stannous octoate, Sn(Oct)2, as a catalyst, and aminopropyl-terminated siloxane prepolymer, as a macroinitiator, in a concentrated toluene solution. Influence of temperature and concentration of the catalyst on the structure, composition and size of the copolymers were investigated by 1H and 13C NMR spectroscopy and dilute solution viscometry.

References

M. Jurišić, D. Stamenković, A. Marković, A. Todorović, V. Leković, B. Dimitrijević, V. Konstantinovic, M. Vukadinović, Oralna implantologija, Belgrade 2008

C. M. Stanford, W. Wagner, Y. Rodriguez, R. Baena, M. Norton, E. McGlumphy, J. Schmidt, Evaluation of effectiveness of dental implant therapy in a practice- based network (FOCUS), Int J Oral Maxillofac Implants, Vol. 25−2 (2010) 367−373

A. Lee, K. Okayasu, H. L. Wang, Screw-versus cement-retained implant restorations:current concepts, Implant Dent, Vol. 19−1 (2010) 8−15

J. G. Wittneben, C. Millen, U. Bragger, Clinical performance of screw versus cement retained fixed implant-supported reconstructions - a systematic review, Int J OralMaxillofac Implants, Vol. 29 (2014) 84−98

E. Sumer, Y. Deger, Contemporary per-manent luting agents used in dentistry: A literature review, Int Dent Res, Vol. 1 (2011) 26−31

P. P. Lad, M. Kamath, K. Tarale, P. B. Kusugal, Practical clinical considerations of luting cements: A review, I Int Oral Health, Vol. 6−1 (2014)116−120

J. P. Matinlinna, L. V. J. Lassila, P. K. Vallittu, Evaluation of five dental silanes on bonding a luting cements onto silica-coated titanium, J Dent, Vol. 34 (2006) 721–726

H. Matsumura, T.Yoneyama, S. Shimoe. Veneering technique for a Ti-6Al-7Nb framework used in a resin-bonded fixed partial denture with a highly filled indirect composite, J Prosthet Dent, Vol. 88 (2002) 636–639

H. Shimizu, K.S. Kutz, Y. Tachii, Y. Takahashi, Use of metal conditioners to improve bond strengths of autopolymerizing denture base resin to cast Ti-6Al-7Nb and Co-Cr, J Dent, Vol. 34 (2006) 117–122

Y. Tsuchimoto, Y. Yoshida, M. Takeuchi, A. Mine, H. Yatani, Y. Tagawa, et al., Effect of surface pre-treatment on durability of resin-based cements bonded to titanium, Dent Mater, Vol. 22 (2006) 545–552

P. P. Lad, M. Kamath, K. Tarale, P. B. Kusugal, Practical clinical considerations of luting cements: A review, I Int Oral Health, Vol. 6−1 (2014) 116-20

P. Garg, M. L. Pujari, S. Khare, Reten-tiveness of Various Luting Agents Used With Im-plant-Supported Prosthesis: An In Vitro Study, Journal of Oral Implantology, Vol. 40−6 (2014) 649−654

M. A. Alfaro, E. Papazoglou, E. A. McGlumphy, J. A. Holloway, Short–term retention properties of cements for retrievable implant-supported prostheses, Eur J ProsthodontRestor Dent, Vol. 12−1 (2004) 33−37

S. Schwarz, C. Schroder, N. Corcodel, A. J. Hassel, P. Rammelsberg, Retrospective comparison of semipermanent and permanent cementation of implant- supported single crowns and FDPs with regard to the incidence of survival and complications, Clin Implant Dent Relat Res, Vol. 1 (2012) 151−158

P. Garg, G. Gupta, D. R. Prithviraj, M. Pujari, Retentiveness of various luting agents used with implant-supported prostheses: a preliminary in vitro study, Vol. 26−1 (2013) 82−84

S. Ban, Effect of alkaline treatment of pure titanium and its alloys on the bonding strength of dental veneering resins, J Biomed Mater Res, Vol. 66 (2003) 138–145

R. G. Fonseca, J. G. Almeida, I. G. Haneda, G. L. Adabo, Effect of metal primers on bond strength of resin cements to base metals, J Prosthet Dent, Vol. 101 (2009) 262–268

M. Di Francescantonio, M. T. Oliveira, L. G. Daroz, G. E. Henriques, M. Giannini, Adhesive bonding of resin cements to cast titanium with adhesive primers, Braz DentJ, Vol. 23 (2012) 218–222

D. S. Cobb, M. A. Vargas, T. A. Fridrich, M. R. Bouschlicher, Metal surface treatment: characterization and effect on composite-to-metal bond strength, Oper Dent, Vol. 25 (2000) 427–433

M. Di Francescantonio, M. T. Oliveira, L. G. Daroz, G. E. Henriques, M. Giannini, Adhesive bonding of resin cements to cast titanium with adhesive primers, Braz DentJ, Vol. 23 (2012) 218–222

C. Ohkubo, I. Watanabe, T. Hosoi, T. Okabe, Shear bond strengths of polymethyl methacrylate to cast titanium and cobalt-chromium frameworks using five metal primers, J Prosthet Dent., Vol. 83 (2000) 50–57

H. Shimizu, K. S. Kutz, Y. Tachii, Y.Takahashi, Use of metal conditioners to improve bond strengths of autopolymerizing denture base resin to cast Ti-6Al-7Nb and Co-Cr, J Dent., Vol. 34 (2006) 117–122

D. S. Cobb, M. A. Vargas, T. A. Fridrich, M. R. Bouschlicher, Metal surface treatment: characterization and effect on composite-to-metal bond strength, Oper Dent., Vol. 25 (2000) 427–433

M. D. Francescantonio, M. T. Oliveira, L. G. Daroz, G. E. Henriques, M. Giannini, Adhesive bonding of resin cements to cast titanium with adhesive primers, Braz Dent J., Vol. 23 (2012) 218–222

H. Koizumi, T. Ishii, K. Naito, T. Yoneyama, N. Tanoue, H. Matsumura, Effects of triazine dithione and hydrophobic phosphate monomers on bonding to Ag-Pd-Cu-Au alloy and titanium with a methacrylic resin-based luting agent, J Adhes Dent., Vol. 12 (2010) 215–222

H. Koizumi, K. Naito, T. Ishii, M. Yamashita, T. Yoneyama, H. Matsumura, Adhesi-ve bonding of Ti-6Al-7Nb alloy and component metals with acidic primers and tri-n-butylborane initiated resin, J Adhes Dent., Vol. 14 (2012) 283–292

H. Petridis, P. Garefis, H. Hirayama, N. M. Kafantaris, P. T. Koidis, Bonding indirect resin composites to metal: Part 1. Comparison of shear bond strengths between different metal-resin bonding systems and a metal-ceramic system, Int J Prosthodont, Vol. 16 (2003) 635–639

J. E. Dudley, L. C. Richards, J. R. Abbott, Retention of cast crown copings cemented to implant abutments, Aust Dent J, Vol. 53−4 (2008) 332−339

J. Dudley, Influence of compressive cyclic loading on the retention of cast crown copings cemented to implant abutments, doctor thesis, University of Adelaide, 2008

M. S. Gale, B. W. Darvell, Thermal cycling procedure for laboratory testing of dental restorations, J Dent, Vol. 27 (1999) 89–99

P. M. Michailesco, J. Marciano, A. R. Grieve, M. J. Abadie, An in vivo recording of variations in oral temperature during meals: a pilot study, J Prosthet Dent, Vol. 73 (1995) 214–218

S. Ergin, D. Gemalmaz, Retentive pro-perties of five different luting cements on base and noble metal copings, J Prosthet Dent, Vol. 88(5) (2002) 491–497

R. Schneider, M. F. De Goes, G. E. Henriques, D. C. Chan, Tensile bond strength of dual curing resin-based cements to commercially pure titanium, Dent Mater 23 (2007) 81−87

H. J. Almilhatti, K. H. Neppelenbroek, C. E. Vergani , A. L. Machado, A. C. Pavarina, E. T. Giampaolo, Adhesive bonding of resin composite to various titanium surfaces using different metal conditioners and a surface modification system, J Appl Oral Sci, Vol. 21−6 (2013) 590−6

C. Ohkubo, I. Watanabe, T. Hosoi, T. Okabe, Shear bond strengths of polymethyl methacrylate to cast titanium and cobalt-chromium frameworks using five metal primers, J Prosthet Dent, Vol. 83 (2000) 50–57

D. S. Cobb, M. A. Vargas, T. A. Fridrich, M. R. Bouschlicher, Metal surface treatment: characterization and effect on composite-to-metal bond strength, Oper Dent, Vol. 25 (2000) 427–433

B. S. Lim, S. M. Heo, Y. K. Lee, C. W. Kim, Shear bond strength between titanium alloys and composite resin: sandblasting versus fluoride-gel treatment, J Biomed Mater Res, Vol. 64 (2003) 38–43

Y. Taira, H. Yanagida, H. Matsumura, M. Atsuta, Effects of a metal etchant and two pri-mers on resin bonding durability to titanium, Eur J Oral Sci, Vol. 112 (2004) 95−100

Y. Taira, K. Yoshida, H. Matsumura, M. Atsuta, Phosphate and thiophosphate primers for bonding prosthodontic luting materials to titanium, J Prosthet Dent, Vol. 79 (1998) 384−388

M. A. Alfaro, E. Papazoglou, E. A. McGlumphy, J. A. Holloway, Short–term retention properties of cements for retrievable implant-supported prostheses, Eur J Prosthodont Restor Dent, Vol. 12−1 (2004) 33−37

A. Diaz-Arnold, W. V. Williams, S. Aguilino, Tensile strenghts of three luting agents for adhesion fixed partial dentures, Int J Prosthodont, Vol. 2−2 (1989) 115−122

S. Bhandari, M. Aras, V. Chitre, An in vitro evaluation of the microleakage under complete metal crowns using three adhesive luting cements, J Indian Prosthodont Soc, Vol. 12−2 (2012) 65−71

O. Kumbuloglu, L. V. Lassila, A. User, P. K. Vallittu, A study of the physical and chemical properties of four resin composite luting agents, Int J Prosthodont, Vol. 17−3 (2004) 357−363

Downloads

Published

2018-02-12